China supplier Custom Worm Gear Curved Hard Tooth Surface Stainless Steel Worm Gear

Product Description

HangZhou QY Precision Co., Ltd
 

QY Precision specializes in design and production of high precision metal parts and components. Focus on industry and action on demand, to be your trusted partner is our mission.
 

 

 

 

Detailed Photos

Custom Worm Gear Curved Hard Tooth Surface Stainless Steel Worm Gear

 

 

Product Description

Gear Introduction

 

Bevel Gears

Bevel gears are most commonly used to transmit power between shafts that intersect at a 90 degree angle. They are used in applications where a right angle gear drive is required. Bevel gears are generally more costly and are not able to transmit as much torque, per size, as a parallel shaft arrangement.

 

Worm Gear

Worm gears transmit power through right angles on non-intersecting shafts. Worm gears produce thrust load and are good for high shock load applications but offer very low efficiency in comparison to the other gears. Due to this low efficiency, they are often used in lower horsepower applications.

 

Helical Gears

Helical gears have teeth that are oriented at an angle to the shaft, unlike spur gears which are parallel. This causes more than 1 tooth to be in contact during operation and helical gears can carry more load than spur gears. Due to the load sharing between teeth, this arrangement also allows helical gears to operate smoother and quieter than spur gears. Helical gears produce a thrust load during operation which needs to be considered when they are used. Most enclosed gear drives use helical gears.

 

Spur Gears

Spur gears transmit power through shafts that are parallel. The teeth of the spur gears are parallel to the shaft axis. This causes the gears to produce radial reaction loads on the shaft, but not axial loads. Spur gears tend to be noisier than helical gears because they operate with a single line of contact between teeth. While the teeth are rolling through mesh, they roll off of contact with 1 tooth and accelerate to contact with the next tooth. This is different than helical gears, which have more than 1 tooth in contact and transmit torque more smoothly.

 

Hypoid Gears

Hypoid gears look very much like a spiral bevel gear, but unlike spiral bevel gears, they operate on shafts which do not intersect. In the hypoid arrangement because the pinion is set on a different plane than the gear, the shafts are supported by the bearings on either end of the shaft.

 

Herringbone Gears

Herringbone gears are very similar to the double helical gear, but they do not have a gap separating the 2 helical faces. Herringbone gears are typically smaller than the comparable double helical and are ideally suited for high shock and vibration applications. Herringbone gearing is not used very often due to their manufacturing difficulties and high cost.

 

Specification:  

Services CNC Milling, CNC Turning, Wire EDM Cutting, 3D Printing,Vacuum Casting,Reaction Injection Molding, Plastic CNC Machining, Laser, Cutting, Stamping Parts, Bending Parts
Material Metal: Aluminum , Copper , Brass , Steel, Stainless Steel, Titanium and etc.
Plastic: ABS, POM, PP, PU, PC,PA66, PMMA, PVC, PVE, Nylon and etc.
Surface treatment Anodizing, Sandblasting, Metal Plating, Polishing, Painting, Powder coating, Brushing ,Silk-screen , Laser Engraving etc.
Heat treatment Annealing, Normalizing , Nitriding, Tempering
File Formats STP, STEP, IGS,STP,X_T ,DXF,DWG , Pro/E, PDF, SLDPRT
Inspection In-house or third party, all the products are strictly inspected by skilled QC
Service Type OEM & ODM Service

Surface Finish:

Available Material:

FAQ

1.How to get a quote?
Kindly send us the drawing of your product,please. Including details as below: a.Materials b. Surface Finish c. Tolerance d. Quantity If you need solutions for your application, kindly send us your detail requirements, and we will have engineers to service you.

2.How does the payment process work?
Payment terms are flexible for us. We can accept different type payment way.

3.How do I know about the production?
We will double confirm your requirements and send you the sample before the mass production as you required. During the mass production,

4.How do I know about the delivery?
Before shipment we will confirm with you about all the details including CI and other attention issues. After ship out, we will inform you of the tracking number and keep updating the latest shipping information for you.

5.What will you do for after sales?
We will follow up and await your feedback. Any question related to our metal parts, our experienced engineers are ready to help. And welcome to contact for any supporting of your other application even if their is no relationship with our products.

 

Packaging & Shipping

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Robotics
Standard: GB, EN, API650, China GB Code, JIS Code, TEMA, ASME, CE, FCC, RoHS, ISO9001:2008
Surface Treatment: Anodizing
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

Can you provide examples of products or machinery that use worm wheels in their systems?

Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:

  • Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
  • Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
  • Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
  • Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
  • Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
  • Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
  • Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
  • Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.

These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.

In what industries or applications are worm wheels commonly utilized?

Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:

1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.

2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.

3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.

4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.

5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.

6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.

7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.

8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.

9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.

10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.

These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.

What are the signs that indicate a need for worm wheel replacement or maintenance, and how can they be diagnosed?

Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:

  • Excessive Wear: Excessive wear on the worm wheel can be identified by visual inspection or measurement. Signs of wear include pitting, scoring, or surface roughness on the teeth. A worn worm wheel may exhibit a change in tooth profile or a reduction in tooth thickness. Regular inspections and measurements of the gear teeth can help diagnose excessive wear and determine if replacement or maintenance is required.
  • Abnormal Noise or Vibration: Unusual noise or vibration during operation can indicate issues with the worm wheel. Excessive wear, misalignment, or damage to the gear teeth can cause irregular gear meshing, resulting in noise or vibration. Monitoring and analyzing noise and vibration levels using sensors and diagnostic tools can help diagnose the source of the problem and determine if maintenance or replacement of the worm wheel is necessary.
  • Increased Backlash: Backlash refers to the clearance between the teeth of the worm and the worm wheel. An increase in backlash can indicate wear, tooth damage, or misalignment of the worm wheel. Excessive backlash can result in reduced efficiency, decreased positional accuracy, and increased noise. Backlash can be diagnosed by measuring the rotational play or movement between the worm and the worm wheel. If the backlash exceeds acceptable limits, it may indicate the need for maintenance or replacement.
  • Reduced Efficiency or Performance: A decrease in the overall efficiency or performance of the mechanical system may suggest issues with the worm wheel. Reduced efficiency can be caused by various factors, including wear, misalignment, or damage to the gear teeth. Monitoring key performance indicators such as power consumption, speed, or torque can help identify any significant changes that may point to problems with the worm wheel. If the efficiency or performance drops below acceptable levels, maintenance or replacement may be necessary.
  • Leakage or Contamination: Leakage of lubricant or the presence of contamination around the worm wheel can indicate seal failure or damage to the gear housing. Inspecting the gear housing for signs of oil leakage, debris, or foreign particles can help diagnose potential issues. If the worm wheel is not adequately lubricated or if contaminants are present, it can lead to accelerated wear, increased friction, and reduced gear life. Addressing the root cause of the leakage or contamination is essential, and it may involve maintenance or replacement of the worm wheel components.
  • Irregular Motion or Positioning: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.

It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.

China supplier Custom Worm Gear Curved Hard Tooth Surface Stainless Steel Worm Gear  China supplier Custom Worm Gear Curved Hard Tooth Surface Stainless Steel Worm Gear
editor by CX 2024-03-26