Product Description
Mold opening customization Injection molding POM gear injection molding manufacturer Non-standard custom nylon helical gear Plastic bevel gear
Nylon gears, acetal (also known as Delrin) gears, and UHMW rack and pinion were originally introduced to the market to fill niche applications; however, this is no longer the case as plastic gears have quickly become a disruptive technology.
While most gears are traditionally made from various metals, plastic gear technology is pushing the previous limits of load carrying, torque handling and gear drive capabilities. These plastic gears and racks are identical in design to metal gears and racks, so they are directly interchangeable with steel and other OEM and custom metal gears and racks.
For nylon gears, self-lubrication is a key advantage. An ongoing problem with many metal drive gears is the need for external lubrication, a major problem when the gear is inaccessible or the lubricant only exacerbates the problem (such as gears operating in high dust or CHINAMFG environments). Can withstand the same load requirements for many applications with longer part life. Many specialty grades are also available to enhance certain properties (such as tensile strength or abrasion resistance) or to meet certain requirements (such as FDA and USDA regulations). Nylon also has high compressive strength and an excellent coefficient of friction at a cost comparable to or lower than alternatives.
About Acetal, also known as Delrin, is ideal for close tolerance gears that operate in harsh environments and do not expand or contract significantly under extreme temperature changes. These acetal gears are typically quiet in operation while providing exceptional strength, toughness and low friction. Acetal gears have even recently found their way into the automotive industry, where load and torque requirements have traditionally limited the usefulness of plastic gears.
UHMW and other high-performance plastic gears and racks offer the advantages of reduced wear and noise reduction compared to their metal counterparts, and UHMW is often considered when impact resistance is key. Many customers report that their UHMW racks have component life that is 10 or even 15 times longer than metal racks.
In addition, we can also customize large modulus gears of other high-performance materials, please contact us for the latest material quotation
Descriptions:
(1) According to the different strength and performance, we choose the steel with strong compression;
(2) Using Germany professional software and our professional engineers to design products with more reasonable size
and better performance;
(3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the
gear can be exerted under different working conditions;
(4) Quality assurance in every step to ensure product quality is controllableProduct parameters
Product parameters
| Products | Gear |
| Module | M0.5-M10 |
| Precision grade | DIN6, DIN7, DIN8, DIN10 |
| Pressure angle | 20 degree |
| Material | C45 steel, Stainless steel 304, Plastic, Brass, 20CrMo,40Cr and so on |
| Heat treatment | Hardening and Tempering, High Frequency Quenching,Carburizing etc |
| Surface treatment | Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating |
| Application | Precision cutting machines. Lathes. Milling machines. Grinders. Automated mechanical systems. Automated warehousing systems. |
| Machining process | Hobbing, Milling, Drilling, Shaving, Grinding |
Application
If you have any problems or want to get the quoted price of any plastics or machined components, please feel free to contact us. Our engineers will reply to you as soon as possible.
Our products cover auto parts mold, electrical appliances injection mold, medical machinery and so on. We provide products and services to more than 60 countries and regions in the world, including Europe, the United States and Southeast Asia.
Our Factory
Our factory has 100 sets of precision processing equipment, welcome to visit our factory!
The factory covers an area of 10,000 square CHINAMFG Production equipment has the original American imported Haas CNC machining center, wire-electrode cutting, electrical discharge machine,Perforating machine, injection molding machine, CNC milling machine,CNC hobbing machine, CNC lathe, CNC milling machine, CNC lathe, CNC milling machine, grinding machine and other machinery and equipment.
One-stop Service
OEM, ODM, Customization service,Reasonable and competitive price,Design for Manufacturability (DFM) analysis with every quote,Short Delivery Time.
Reliable mold expert 15+ years’ experience, Cooperated with many world famous brands for many years, Specialize in large and complex injection mold making, One-stop service from design to production.
Certification
Companies strictly enforce the ISO9001(2008)international quality certification system, the product quality conforms to the eu RoHS standard.
Professional team
Our company is developing in the mode of quality for survival, brand for development and customer’s demand, welcome new and old customers to visit our factory for guidance.
Client Witness
Our Exhibition & CCTV Interview
Buying Instructions
Q1. Can samples be produced?
A1. Yes
Q2. What is the accuracy of the products processed by the drawings?
A2. Different equipment has different accuracy, generally between 0.05-0.1
Q3. What craftsmanship do you have for processing accessories?
A3. According to different products, different processes are used, such as machining, extrusion, injection molding, etc.
Q4. What are your processing equipment?
A4. CNC machining center, CNC lathe, milling machine, engraving machine, injection molding machine, extruder, molding
machine
Q5. Can you help assembling the product after it is made?
A5. It’s okay
Q6. What certifications or qualifications does your company have?
A6. Our company’s certificates are: ISO, ROHS, product patent certificates, etc.
Q7. Can injection products be surface treated? What are the surface treatments?
A7. It is ok. Surface treatment: spray paint, silk screen, electroplating, etc.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Nylon |
| Customization: |
Available
|
|
|---|
What maintenance practices are recommended for worm wheels to ensure optimal functionality?
Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:
- Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
- Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
- Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
- Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
- Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
- Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
- Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
- Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.
By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.
What maintenance practices are recommended for worm wheels to ensure optimal functionality?
Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:
- Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
- Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
- Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
- Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
- Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
- Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
- Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
- Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.
By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.
What are the advantages of using a worm wheel in gearing systems?
Using a worm wheel in gearing systems offers several advantages, making it a popular choice for various applications. Here’s a detailed explanation of the advantages of using a worm wheel:
- High Gear Reduction: Worm wheels provide significant gear reduction ratios, allowing for large speed reductions and high torque output. The helical shape of the worm gear teeth and the interaction with the worm enable gear ratios ranging from 5:1 to 100:1 or even higher. This makes worm wheels suitable for applications that require high torque and low-speed operation.
- Compact Design: The perpendicular arrangement of the worm gear and the worm wheel allows for a compact design, making efficient use of space. This is especially beneficial in applications where space is limited or where a compact and lightweight design is desired.
- Self-Locking: One of the unique properties of a worm wheel system is its inherent self-locking ability. Due to the sliding action and the angle of the helical teeth, the worm wheel can hold its position and prevent backdriving. This means that even when the driving force is removed, the worm wheel remains locked in place, enhancing safety and stability in applications where position holding is critical.
- High Torque Capability: The sliding action and increased tooth engagement of the worm wheel design allow for a larger contact area between the worm gear and the worm wheel. This results in higher torque transmission capacity compared to other gear types, making worm wheels suitable for applications requiring high torque output.
- Quiet Operation: The sliding action between the worm gear and the worm wheel results in smoother and quieter operation compared to other gear types. The helical teeth of the worm wheel help distribute the load over multiple teeth, reducing noise and vibration, and providing a smoother transmission of power.
- Directional Control: Worm wheels offer excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is advantageous in applications where precise motion control and prevention of backward movement are required.
- Efficient Power Transmission: The sliding action, larger contact area, and self-locking nature of the worm wheel design contribute to efficient power transmission. The reduced friction and wear, along with the optimized tooth engagement, help minimize energy losses, improve overall system efficiency, and reduce the need for frequent maintenance.
- Versatility: Worm wheels can be manufactured in various sizes, materials, and configurations to suit different application requirements. They can be customized to meet specific torque, speed, and space constraints, making them versatile for a wide range of applications across industries.
These advantages make worm wheels suitable for a variety of applications, including automotive, industrial machinery, elevators, robotics, and more. However, it’s important to consider factors such as lubrication, proper gear meshing, and maintenance to ensure the reliable and efficient operation of worm wheel systems.
editor by CX 2024-03-25